Description
-
Achieves intense blowback
Equipped with an AK-specific blowback engine that uses a large piston with a diameter of approximately 19mm. The bolt also operates in conjunction with the firing, allowing you to enjoy the intense recoil shock.
-
realistic operation
It faithfully reproduces the functions similar to the real thing, such as loading the first bullet by operating the bolt handle and stopping the bolt from advancing when it runs out of bullets.
-
short barrel custom
The easy-to-handle 8.7-inch barrel and original design 3-port muzzle brake are machined from aluminum. In addition, by removing the muzzle brake, it is possible to install muzzle options with 14mm reverse thread specifications such as a silencer.
-
M-LOK rail system
The latest rail system “M-LOK” is adopted for the highly rigid aluminum cutting hand guard. The lower hand guard allows you to add rails only where needed, and has a slim and easy-to-handle design. M-LOK rails with a width of 20 mm (Picatinny standard) come with one each of three types: 3 slots, 5 slots, and 7 slots. It can be easily attached and detached using the included hex wrench.
-
Upper rail standard equipment
Equipped with a mount rail with a width of 20mm (Picatinny standard) from the top of the handguard to the top of the receiver cover. Various optical sights can be attached. In addition, a newly developed locking mechanism has been adopted to eliminate aiming blur caused by rattling of the receiver cover. Just by tightening the centering dial, the receiver cover will be firmly fixed, and at the same time the rail will automatically adjust its position to the center.
-
front/rear sight
The front sight can be adjusted vertically and horizontally using a special adjustment tool. In addition, the rear end of the rail of the receiver cover is equipped with a foldable backup rear sight that takes into consideration the use of an optical sight.
-
folding stock
The collapsible folding stock uses a convex skeleton design that makes it easy to move the muzzle up and down. This is a removable type that is fixed to the receiver with a 20mm wide (Picatinny standard) rail. The stock body is made of reinforced plastic, and the stock base is equipped with a QD hole that is compatible with the separately sold “QD sling swivel.”
-
Aluminum die-cast magazine
A Bakelite type magazine with a capacity of 35 bullets is reproduced by integral molding of aluminum die-casting.
full length 548 mm / 741 mm (when stock is expanded) gun length 200mm weight 3,550 g (including empty magazine) bullet 6mm BB (0.2~0.25g) power source Dedicated gas (*1) Number of bullets 35 + 1 shot (1 shot when loaded in the main body) Model name AKX kinds Assault rifle
