• MAXX Model CNC  VFC SCAR-L/H Hopup Chamber SV by Maxx Models at Airsoft Wholesale

MAXX Model CNC VFC SCAR-L/H Hopup Chamber SV

MAXX Model CNC VFC SCAR-L/H Hopup Chamber SV CNC Aluminum Hopup Chamber SV unit is specially designed to improve accuracy, durability and ensure consistent air seal for VFC SCAR-L/H AEG series. The Hopup Chamber SV unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot. The Hopup Chamber SV unit is designed to accept the nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H, and also fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs. The Hopup Chamber SV Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting. With the new extended sliding arms design on both side of the chamber housing, the hopup unit is always centered, straight and air tight at all times when closing the receivers.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)

***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

Includes
1 x CNC Aluminum Hopup Chamber SV unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
1 x Steel Compression Spring

Specification
Overall Length: 48.35mm
Overall Height: 27mm
Hub Outer Diameter (to fit into Gear Box): free size
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): free size
Feeder Length (to fit magazine): free size
Material: Aluminum 6061

Features
Machined from a solid aircraft aluminium block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for VFC SCAR-L/H AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Extended sliding arms design on both side of the chamber housing to ensure the hopup unit is always centred, straight and air tight at all times when closing the receivers
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!

The Empty Magazine Detection Sensor to stop Motor/HPA firing ready! Usage Compatible with VFC Scar-L/H AEG series
Requires Wearing eye protection is recommended Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

MAXX Model CNC VFC SCAR-L/H Hopup Chamber SV by Maxx Models

  • Brand: Maxx Models
  • Product Code: MXHOP007SV
  • Product ref : 9105
  • EAN : 5051160182520

Related Products

ZCI M4 / M16 CNC Rotary Hop unit

ZCI M4 / M16 CNC Rotary Hop unit

ZCI M4 / M16 Rotary Hop unit similar to the prowin but fully CNC manufactured to fine-tuning and inc..

ZCI Rotary M4 hop unit - Plastic

ZCI Rotary M4 hop unit - Plastic

ZCI Rotary M4 hop unit - Plastic Includes Hop rubber Some assembly required..

MAXX Model ICS  CNC  Hopup Chamber MI - SPORT w/ Tracer

MAXX Model ICS CNC Hopup Chamber MI - SPORT w/ Tracer

MAXX Model CNC Aluminum Hopup Chamber MI - SPORT with Tracer For the ICS Rifles PRODUCT INFOR..

MAXX Model CNC ICS Hopup Chamber MI - PRO

MAXX Model CNC ICS Hopup Chamber MI - PRO

MAXX Model CNC ICS Hopup Chamber MI - PRO ICS fitting only CNC Aluminum Hopup Chamber MI Pro (..

MAXX Model CNC ICS Hopup Chamber MI - PRO w/ Tracer

MAXX Model CNC ICS Hopup Chamber MI - PRO w/ Tracer

MAXX Model CNC ICS Hopup Chamber MI - PRO w/ Tracer Fits ICS AEGS only CNC Aluminum Hopup Cham..

MAXX Model CNC M4 Hopup Chamber ME - PRO

MAXX Model CNC M4 Hopup Chamber ME - PRO

MAXX Model CNC M4 Hopup Chamber ME - PRO CNC Aluminum Hopup Chamber ME Pro (with BB Latching System..

MAXX Model CNC  ICS Hopup Chamber MI - SPORT

MAXX Model CNC ICS Hopup Chamber MI - SPORT

MAXX Model CNC ICS Hopup Chamber MI - SPORT Will Fit ICS Weapons only CNC Aluminum Hopup Chambe..

MAXX Model M4 CNC Hopup Chamber ME - SPORT

MAXX Model M4 CNC Hopup Chamber ME - SPORT

MAXX Model CNC Hopup Chamber ME - SPORT CNC Aluminum Hopup Chamber ME Sport (with BB Catching S..

MAXX  CNC Aluminum Hopup Chamber ME - PRO w/ LED

MAXX CNC Aluminum Hopup Chamber ME - PRO w/ LED

MAXX CNC Aluminum Hopup Chamber ME - PRO w/ LED Compatible with most Tokyo Marui (include KRYTAC, e..

Tags: maxx, model, cnc, vfc, scar-l/h, hopup, chamber, 9105, models